Pneumec Kontrolls Private Limited

Additional Information:

• Delivery Time: 2-4 WEEKS

• Simple design air line couplings on free turn manifold
• Each air outlet can be turned freely to any angle independently.
• Multiple outlets are available from single air supply source.
• Sideway air outlets are rotatable to any angle. Possible hose twists can be eliminated by the component Cuplas’ swivel mechanism.
• Choose either RT type (2 outlets) or RE type (3 outlets) to suit your application.

Additional Information:

• Delivery Time: Ex Stock

Additional Information:

• Delivery Time: Ex Stock

Additional Information:

• Delivery Time: Ex Stock

• Unique full-open gate type valve mechanism realizes low pressure loss and high flow rate, which reduces required source air volume.
• The flow rate is increased by up to 40% more then that of conventional Cuplas..
• During connection and disconnection the valve is closed, enabling connection/disconnection under zero line pressure.
• When the sleeve of socket is returned to its original position, the purge mechanism releases the residual air pressure in the plug, eliminating an unpleasant popping noise and a hose whip back motion on disconnection.
• Built-in sleeve lock mechanism prevents accidental disconnection of cuplas, ensuring safe operation.
• The valve can be opened and closed while the socket and plug are connected.
• The weight is reduced by 30 to 45 % compared with that of conventional cuplas.

• For medium pressure and general applications
• Valveless structure suits high viscosity fluids!
• Various body materials, sizes and end configurations.
• Braided hose connection types are newly added.
• Valveless construction drastically saves pressure loss and achieves high flow rate.

• For hydraulic pressure from 14.0 to 20.6 Mpa {142-210 kgf/cm2}
• Special steel body is tough against vibration and impact!
• Male and female thread end configurations are available.
• Low pressure loss characteristic suits hydraulic equipment applications.
• Quenched special steel body!
• Powerful impact resistance, especially against impulses.
• Automatic shut-off valves in both socket and plug prevent fluid spill out on disconnection. Easy to handle.
• In addition to conventional female thread type, male thread types (male tapered thread, male parallel thread with 30 degree flare, and male parallel thread with 30 degree cone-seat)are newly added. Male thread types are designed especially for direct connection to hydraulic power units effectively.
• Male parallel thread type complies with both metal seal and 0 ring seal. (In case of 0-ring seal, 0-rings available in the market can be used.)
• Optional HSP-DC Cuplas are available for die-casting machine applications with severe pressure variation.
• The overall length of male thread type is shorter than that of female thread type plus conversion nipple available in the market.
• PL type (Safety sleeve lock type) for 2HS to 8HS (except 66HS) with female thread is also available as standard.

Additional Information:

• Delivery Time: Ex Stock

Additional Information:

• Delivery Time: Ex Stock

• For hydraulic pressure up to 35.0 MPa with flat contact face
• Flat contact face design makes it easy to clean dust and foreign matters adhered on the surface of coupling to prevent from entering inside and causing faulty operation.
• Minimizes air admixture during connection.
• Push-to-connect operation.
• Sleeve stopper mechanism is engaged by rotating sleeve after connection preventing accidental disconnection.
• The special design reduces pressure loss considerably.

Additional Information:

• Delivery Time: 2-4 weeks

• Couplings used in spot cooling system of die-casting dies
• Quick Connect design serves for improved efficiency in Mold change or repair work

• Automatic shut-off valves in both socket and plug for vacuum applications.
• Each can withstand a vacuum of as high as 1.3 x 10-1Pa even when disconnected.
• Uses automatic shut-off valves with utral-tight sealed construction in both socket and plug. Ideal for vacuum applications.
• Having automatic shut-off valves in both socket and plug facilitates easy fluid handling. Suitable for a wide range of vacuum applications as high as 1.3 X 10-1 Pa {1 x 10-3 mmHg} even when disconnected.
• Three types of seal material are available to suit any of the diversified production lines for air conditioners, refrigerators or similar.
• Can be connected with SP Cupla Type A.
• Can be used for charging refrigerant gas and to create vacuum 

• Simultaneously connects several ports securely in one operation.
• Greatly reduces changeover time in multiple ports replacement.
• Handles several ports at once.
• Simple manual lever action completes easy connection /disconnection.
• Two stage lever operation prevents Cupla from accidental dropping due to sudden detachment.
• Comes with lock mechanism to prevent accidental disconnection.
• Large flow equivalent to that of SP Cupla Type A.
• Two kinds of plates are available for each size.
• Automatic shut-off valves in both socket and plug prevent fluid spill out on disconnection.

• Airless valve shut-off design greatly reduces air admixture!
• Ideal for hydraulic lines with larger pressure fluctuations
• Both socket and plug have built in automatic shut-off valves to prevent fluid spill out when disconnected. Easy to handle.

• Exclusively for oxyacetylene equipment
• Many variations with higher flow rates
• From cylinders to torches, all piping connections associated with welding and cutting equipment are push-to-connect operations.
• Double-lip seal prevents minor leak during connection. Oxygen and fuel gas Cuplas have different sizes to prevent accidental interconnection. Plugs with backflow stop valve in Mini Cupla are designed for gas welding/cutting to prevent occurrence of gas mixing.
• Pressure loss is minimized to achieve higher flow rate.
• Various types of end configurations have been standardized to comply with a wide range of welding and cutting equipment applications.

• Universal purpose couplings for air lines
• From factory air line to pneumatic tool connection, available in various body materials, sizes and end configurations.
• Excellent durability.
• An excellent general purpose coupling for connecting factory air supply to pneumatic tools.
• Steel coupling is suitable for air. Brass or stainless steel is suitable for water. Note that fluid will come out from the plug when disconnected.
• Critical structural parts of steel models are heat-treated for increased strength giving greater durability and resistance to wear.
• Available in various body materials, sizes and end configurations applicable to a wide range of applications.
• Body Nate. 

• Minimizing spillage during disconnection keeps workshops clean
• Unique seal design reduces both liquid spillage and air ingress.
• Reliable zero friction valve.
• Push-to-connect design.
• One-hand easy operation.
• Wide variety of material options available.
• Automatic sheet of valve in both sockets and plugs prevent fluid spill out on disconnection.

Additional Information:

• Delivery Time: 2-4 weeks

• For Medium Pressure general applications
• SP Cupla is totally redesigned with an increased flow volume of upto 60%
• High flow type SP Cupla is now released.
• Plugs with male thread end are newly added.
• New self aligned valve design provides better seal.
• Smooth and prompt connection

Additional Information:

• Delivery Time: Ready Stock

• Light lever pull-down will connect the plug and socket without fail, ready to flow liquid or gases.
• This Cupla complies with diversified applications in liquid or gas transportation.
• End-face seal structure enables no bumps or hollows on the internal fluid passage, and ensures smooth fluid transportation.
• “Special lip seal” adopted (except 3/4", 1" sizes and silicon rubber seal) for light lever action and tight sure sealing when connected.
• Connection part dimensions comply with US military specifications MIL-A-A-59326
• The variety of body materials sizes and end configurations has been standardized to comply with wide range of applications.
• Additional stopper function design will enhance safety (made-to-order product).
• Also available in body material polypropylene (PP)

• Eliminates hose twisting, kinking, or bending!
• Greatly improves working efficiency!
• A plug with a free twisting neck for hose connections to pneumatic tools and devices.
• Free angle control ( max.700 flexible) provides comfortable job positions, even in narrow spaces or with overhead works.
• The flexible part is reinforced with self-lubricating plastics to give smooth bending action and excellent durability.
• Dust protector over the flexible part prevents dirt and swarf from entering.

• Ideal for eliminating residual pressure in piping. 
• Couplings can be connected smoothly. Slim and neat piping with an in-line design.
• Eliminates residual pressure instantly. 
• Can be operated with a screwdriver if the button is stiff.

• For even coolant flow rate and reproducing prescribed flow rate
• Flow meter with special valve for mold cooling line
• Graduated scale enables easy visual check of flow rate regardless of operator.
• Built in flow rate adjustment valve enables desired setting of mold conditions for each machine.
• Easy resumption of previously set molding conditions to cut lead times.
• T2 side is equipped with rotary functions. Even after flexing the body on T1 side to the piping. additional screw tightening on T2 side is possible.
• Maintenance is extremely simple.