Pneumec Kontrolls Private Limited

Features:

• Actual tightening torque can be checked by the digital indicator and torque can be recorded on the micro SD card equipped with the PDX.
• No need heavy manual torque wrench.
• PDX including precise torque wrench(Torque indicator) is equipped.

Digital Torque Wrench TDT-series Simple & Easy Tightening Torque Management with Ratchet Digital Torque Wrench.

Features:

• Tightening condition monitoring function.
• Pass & Fail function.
• Tightening Torque storage function.
• USB data transfer function.
• Work in both CW and CCW directions.
• 2 measurements modes available (Peak & Tracking Mode)
• Alert by beeping sound and Red LED when reaching the target torque.

Torque Wrench, Preset Type is for tightening bolts/nuts. When reaching the preset torque, the wrench makes a click sound as well as light retroaction.

Is highly Reliable as TONE brand is a pioneer of Shear Wrench and is 100% Made in JapanShear Wrench are designed for special TC Bolts. TC Bolts tip are sheared by the special sockets. A cut off tip of the TC bolt means that the torque is achieved. It helps in visual inspection of the bolts. Bolting Quality is maintained. It is very helpful for steel structure bolting applications where the number of bolts to be tightened are more.

Features:

• Tension Control Bolt (TC Bolt) is calibrated bolt. It knows when required tension has been reached.
• A splinned tip,grasped by Inner socket, and Nut covered by Outer socket, countervailing respectively, prevent bolt from turning.
• When tip is gone, tension is correct.

Dedicated torque wrench for tightening bolts and nuts.
[Features]
· Digital-type torque setting for easy identification of displayed value.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or a sensation to the hand.
· Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
· Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
[Applications]
· For assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.

Features:

• Work in both CW and CCW directions.
• Over-torque preventing function installed.
• 2 measurements modes available (Peak & Tracking Mode)
• Controllable torque range 30~300cNm & 60~600cNm.
• With bit changeable function.
• Alert by beeping sound and Red LED when reaching the target torque.